black-red-yell-logo.png
make6.png
recyclegreenlogo.png
Toll Free: (800) 398 - 5733
Fax: (586) 465 - 6709
em-5.png Contact Inside Sales
new-home-button.jpgind-single.jpgmob-single.jpgind-double.jpgmob-doub.jpgind-triple.jpgmob-trip.jpg
indust-thru-drive.jpgmob-thru.jpgpiston-pumps.jpgpower-steering.jpgmotors.jpgvalves.jpgtransmissions.jpg
Online Ordering

Request Quote

Hydraulic Repair

Trouble Shooting

black-red-yelpro.png

Your Best Source For After Market And Remanufactured Vickers Hydraulics!

We Offer Free Repair Evaluations on
Denison & Vickers, Hydraulics! Call Today For Your Free Repair Evaluation!

Vickers Motors
Vickers Industrial Motors
Vickers Mobile Motors

Vickers Pumps
Vickers Piston Pumps
Vickers Single Vane
Vickers Double Vane
Vickers Triple Vane
Vickers Thru Drives
Vickers Transmissions
Vickers Valves

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Vickers PVH98 Piston Pump

PVH98 (QI)C - R (A) F 1 S- 10 - C 25 (**) (**) - 13-***

PVH98 Pump Series
maximum Geometric displacement
57 = 57,4cm 3 /r (3.5 in 3 /r)
74 = 73,7cm 3 /r (4.5 in 3 /r)
98 = 98,3cm 3 /r (6.0 in 3 /r)
131 = 131,1cm 3 /r (8.0 in 3 /r)
QI Design / application
Blank - Design For Mobile Applications
QI - Quiet Design For Industrial Applications
C Mounting flange - Prime Mover End
C - SAE "C" 4-bolt Type (SAE J744-127-4)
M - ISO 3019/2-125B4HW (Option For PVH 57 & PVH Only. Must Use "N"Shaft)
R Shaft rotation - Viewed From Prime Mover End
R - Right Hand (Clockwise)
L - Left Hand (Counter Clockwise)
A Configuration
Blank - Non Thru-Drive (single pump)
A -Thru-Drive Pump With SAE "A" 2-Bolt Rear Flange Mounting (SAE J744-82-2)
B - Thru-Drive Pump With SAE "B" 2&4-bolt { Built From Pump With SAE "A" Rear Pad To Which Suitable Flange Adaptor Is Bolted. For Best Availablity & Flexability Order PVH SAE"A" Thru-Drive Pump & SAE "B" Or "C" Adaptor Kit Separately.} Rear Flange (SAE J744-127-2/4)
C - Thru-Drive Pump With SAE"C" 2- & 4-bolt Rear Flange Mountings { Built From Pump With SAE "A" Rear Pad To Which Suitable Flange Adaptor Is Bolted. For Best Availablity & Flexability Order PVH SAE"A" Thru-Drive Pump & SAE "B" Or "C" Adaptor Kit Separately.} (SAE J744-127-2/4)
S - Adjustable Maximum Volume Stop ( Non Thru-Drive & Non-Torque-Control Models Only )
F main Ports
F- Sae 4-Bolt Flange Ports
M - SAE 4-Bolt Flange Ports With Metric Mounting Bolt Threads
1 Shaft-end type - At Prime Mover End
N - ISO 3019/2-E32N Short Straight Keyed (Must Use "M" Mounting Flange
1 - SAE "C" Straight Keyed ( J744-32-1)
2 - SAE "C" Splined 14 Tooth 12/24 D.P. (J744-32-4)
3 - SAE "CC" Splined 17 tooth 12/24 D.P. (J744-38-4)
12 - SAE "D" Splined 13 Tooth 8/16 D.P. (J744-44-4)
13 - SAE "CC" Straight Keyed (J744-44-1)
16 - SAE "D" Straight Keyed (J744-44-1)
S Shaft Seal - Prime Mover End
S - Single, One Way
D - Double Two Way,Recommended on second pump of tandem assemble (PVH**/PVH**) and "wet mount" applications
10 Pump Design Number - (Subject to Change Installation dimensions unaltered for desighn numbers 10 - 19 inclusive)
C Pressure Compensator & Adjustment Range
C - 70-250 bar (1015-3625 psi)
CM - 40-130 bar (580-1885 psi)
IC - Industrial Control, 20 bar (290psi) differential pressure setting (QI models only)
25 Pressure compensator - Factory Setting In Tens Of Bar
25
- Normal Factory Setting of 250 bar (3625 psi) for "C" models
7
- Normal Factory Setting of 70 bar (1015 psi) for "CM" models
(**) Additional Control Functions
Blank - No Additional controls
V - Load Sensing, 20 bar (290 psi) differectial pressure setting
T - Torque Limiter
VT - Load Sensing and Torque Limiter
(**) Torque Limiter Factory - (Use With "T" & "VT" Above)
**
- Customer desired torque limiter setting specified in ten bar (145 psi) increments Example:
8 =
80 bar (1160 psi)
18
= 180 bar (2610 psi)

13 Control Design Number
31 - C, CM, C**V, or IC Controls
13 - C**T Controls
14 - C**VT Controls
*** Special Features Suffix
027 - Composite 2-bolt / 4-bolt mounting conforming to SAE "C" (except PVH131)
031 - Thru-Drive SAE "A Pad Cover
041 - No Case To Inlet Relief Valve (For use with supercharged circuits). 3,4 bar (50 psi) maximum inlet pressure
057 - Shaft-up Operation (Vertical Mount)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vane Pumps | Piston Pumps | Motors | Transmissions | Thru Drives | Valves | Power Steering Pumps | Home
All manufacturer's names, numbers, & descriptions are used for reference purposes only.
It is not to be implied that any item is the product of these manufacturer's.